Spin Finish Polyester FDY

• Imparts low fibre to metal dynamic friction and high filament cohesion 
  
• Good sizing ability 
• Spreading ability for uniform application 
• Spin Finish can be removed easily with water 
• Non yellowing characteristics 

• EMULSION CONCENTRATION : 14 - 18% 
• OIL APPLICATION : 0.8 - 1.0% for Circular cross section 1.0 - 1.2% for Bright Trilobal cross section 
• SHELF LIFE : 12 Months 
• EMULSION PREPARATION : For preparing spin finish solution only DM water should be used.  DM water conductivity should be 0.5, S/Cm and free from silicic acid.  For the protection of Bacteria, we recommend to add Bactericide to the water and stir for 10 Minutes.  Pour Witcol Spin Finish in DM water with continuous stirring until it is fully emulsified. 
• STORAGE CONDITION : Protect From heat and frost. 
• PACKING : 200 kgs in Plastic Drums / 1 Mt in Plastic containers.

Description:

WITCOL FDY 50 PE is a combination of lubricants, surfactants and antistatic agents with various additives to facilitate the FDY process and enhance performance during knitting (Warp & Circular) Twisting and Weaving process.

Special Features:

• Imparting Low fibre-metal dynamic friction and high filament cohesion to have good package build up and avoid overthrown ends or loops
• Good Antistatic properties and Good sizing ability
• Stable thermal characteristics with low fuming tendency
• Ensures Non Corrosive properties and non irritating to the skin
• Excellent wetting and penetration resulting uniform application
• Non yellowing characteristics
• Residues are water soluble and can be easily cleaned from the Godets

NB : Product must be stored at >25^oC. Please ensure that while preparing emulsion, Spin Finish is crystal clear and temperature is more than 25^oC.

Disclaimer:

The information given here is considered to be correct and offered for your consideration, investigation and verification. No warranties are expressed or implied since the use of products are beyond our control.