विटकोट इंडस्ट्रियल पेंट

उत्पाद वर्णन

Witcoat Synthetic Enamel PaintDESCRIPTION: Witcoat Synthetic Enamel Paint is a modified alkyd based coatings resistant to Salt water, acids, alkalis and wide range of chemicals.This is free from Lead, Chromate, and Chlorine & Heavy metals. RECOMMENDED: As a finishing coat for exterior and interior surface, modified alkyd & Pigment based systems is used for corrosive marine and industrial environment. Suitable for protection of Pipes & structural steel in chemical and fertilizer plants, dock installation, thermal power plants etc.PHYSICAL PROPERTIES: Proprieties specification NOTE FINISH : Smooth & Semi Glossy to Glossy APPLICATION VISCOSITY@ 300C 20-25 Sec By B-4 Ford Cup SHADE : According to the requirement of the party Visually VOLUME SOLID % 35 % THEORETICAL SPREADING : 7 -10 m2/ltr @ 35-45 microns Dry film thickness FLASH POINT : Above 30 0C Abel Closed Cup Drying time @ 300C : Tack free Hard Dry 3-4 hrs. O/N SHELF LIFE : 6 months Months at 300C APPLICATION DETAILS: Application Method Air Spray Brush Recommended Thinner Witcoat G.P. Thinner Film Thickness Dry: 35-45 microns (By Dft-Meter) SURFACE PREPARATION: Remove oil grease with suitable detergent solution; and other contaminants by high pressure fresh water hosing. Dust off residue.APPLICATION CONDITIONS: Apply only on a dry and clean surface, with a temperature above the dew point to avoid condensation.SAFETY: As a general rule, inhalation of solvent vapour or paint mist and contact of liquid paint with skin and eyes should be avoided. Forcedventilation should be provided when working with solvent borne coating in confined spaces or stagnant air.Even when ventilation isprovided respiratory skin & eyes protection are always recommendedwhen spraying. In addition, national local safety regulations should be followed. DISCLAIMER: The information contained within this data sheet is based on information believed to be reliable at the time of its preparation. The company will notbe liable for loss or damage howsoever caused including liability fornegligence,Which may be suffered by the user of the data contained herein. It is the users responsibility to conduct all necessary tests to confirm the suitability of any product or system for their intended use. No guarantee of results is implied since condition of use is beyond our control.Minimum Order Quantity : 210 Ltrs.