Cookie Img
Back to top
Send SMS Send Inquiry
Home » Products » Spin Finishes For Polyester/Nylon/PP » Spin Finish For Polyester POY

Spin Finish For Polyester POY

Spin Finish For Polyester POY
Spin Finish For Polyester POY
Product Code : SFPPOY 15
Brand Name : WITMANS INDUSTRIES
Product Description

Spin Finish For Polyster POY

With the assistance of our extensive distribution network, we are proficient to bring forth a special array of Spin Finish For Polyster POY for our respected patrons. Our offered spin finish is a blend of high quality lubricants and surfactants that facilitate processing of Polyester POY and boost subsequent false twist draw texturing process. This Spin Finish For Polyster POY is well appreciated in the market for good anti static and stable thermal characteristics.

SPECIAL FEATURES :

  • T2 tension in Texturising is less by Using Witcol Spin Finish compared to Competitor 
  • Higher retention of spin finish after subsequent texturising process resulting commercial gain 
  • Imparting Low fibre-metal dynamic friction and high filament cohesion to have good package build up and avoid overthrown ends or loops 
  • Good Anti Static Characteristics 
  • Stable Thermal Characteristics with low fuming tendency 
  • Excellent compatability with Polyurethene disc 
  • Ensures Non Corrosive properties and non irritating to the skin 
  • Excellent wetting and penetration resulting low broken filament while processing of Micro Deniers at Texturising  
  • Good cracking behavior and ensures long primary heater cleaning cycles 
  • Residues are water soluble and can be easily cleaned from the Godets

TECHNICAL SPECIFICATION :

Properties Test Method Witcol Spin Finish-POY
Appearance Naked Eye Clear Liquid
Colour (Gardner No.) Colour Comparator (D-1500) Max. 2.5
Viscosity @ 40 (Cst) BS /IP/SL Size-2A Viscometer tube (D-445) 160 +15
Emulsion Stability ( 10% Emulsion in Distilled Water ) Naked Eye Clear & Stable
PH ( 10% Emulsion in Distilled Water )  Digital PH Meter 6.5 + 0.5
Acid Value ( Mg / Gm) Volumetric Titration By 0.1 N Meth.KOH Solution Max. 2.0
Density @ 300 C (Gms / cc) Hydrometer 1.0 + 0.04
Active Content ( %) Karl Fischer App(D-6304) 90+2.0

  • EMULSION CONCENTRATION : 8 -10% in DM Water
  • OIL APPLICATION :
             Normal Denier   0.35 - 0.40%
             Micro Denier       0.48 - 0.55 %
             Dope Dyed          0.48 - 0.58 %
  • SHELF LIFE : 12 Months 
  • EMULSION PREPARATION :  For preparing spin finish solution only DM water should be  used.  DM water conductivity should be 0.5S/Cm and free from silicic acid.  For the protection of Bacteria, we recommend to add Bactericide to the water and stir for 10 Minutes.  Pour Witcol Spin Finish in DM water with continuous stirring until it is fully emulsified.
  • STORAGE CONDITION : Protect From heat and frost.
  • PACKING : 200 kgs in Plastic Drums or 1 Mt in Plastic containers.

SPIN FINISH (POY)

WITCOL SPIN FINISH D – 93 EHLM

DESCRIPTION:

Witcol D - 93 EHLM spin finishes is a combination of lubricants and surfactants to facilitate processing of Polyester POY and enhance subsequent False Twist Draw texturing process.

SPECIAL FEATURES:

  • Imparting Low fibre-metal dynamic and filament cohesion to have good package build up and avoid overthrown ends up or loops
  • Good Antistatic properties and Excellent compatibility with polyurethane disc
  • Stable thermal characteristics with low fuming tendency
  • Ensures Non Corrosive properties and non irritating to the skin
  • Excellent wetting and penetration resulting low broken filament while processing of Micro Deniers at Texturising.
  • Good cracking behaviour and ensures long primary heater cleaning cycles.
  • Residues are water soluble and can be easily cleaned from the Godets
TECHNICAL SPECIFICATION:

PROPERTIES

UNIT

ASTM METHODS

SPECIFICATION

Appearance

Attribute

Visual

Clear Liquid

Colour (Gardner No.)

Number

ASTM D - 1544

Max. 4

Viscosity @ 40⁰C

CST

ASTM D - 445

100 ± 15

10% Emulsion

Attribute

Visual

Transparent

pH of 10% Emulsion

Number

ASTM D - 664

7.5 ± 0.5

Acid Value

mg. KOH / gm.

ASTM D - 974

Max. 6.0

Density @ 30⁰C

gm. / cc

ASTM D – 1298

1.05 ± 0.05

Active Content

%

ASTM D – 4377

90 ± 2

Pour Point

°C

ASTM D - 97

Max. 10

NB: Product must be stored at >25oC. Please ensure that while preparing emulsion, Spin Finish Is crystal clear and temperature is more than 25oC.

DISCLAIMER:

The information given here is considered to be correct and offered for your consideration, investigation and verification. No warranties are expressed or implied since the use of products are beyond our control.


WITMANS INDUSTRIES PVT. LTD

Contact Us

( *represents compulsory fields )

Tips on getting accurate quotes. Please include product name, order quantity, usage, special requests if any in your inquiry.