Cookie Img
Back to top
Send SMS Send Inquiry
Home » Products » Paints and Primer » Q.D. Anticorrosive Black Paint

Q.D. Anticorrosive Black Paint

Q.D. Anticorrosive Black Paint
Q.D. Anticorrosive Black Paint
Product Code : PP 21
Brand Name : WITMANS INDUSTRIES
Product Description

Witcoat Q.D. Anticorrosive Black Paint

DESCRIPTION:  

Witcoat Q.D. Anticorrosive Black Paint is a modified alkyd based coatings resistant to Salt water, acids, alkalis and wide range of chemicals. This is free from Lead, Chromate, and Chlorine & Heavy metals.                                       

RECOMMENDED:

As a finishing coat for exterior and interior surface, modified alkyd & Pigment based systems is used for corrosive marine and industrial environment. Suitable for protection of  Pipes  & structural   steel in chemical and  fertilizer  plants, dock installation,  thermal power   plants  etc.

 PHYSICAL PROPERTIES:

Proprieties

Specification

Note

Finish

Smooth & semi glossy to glossy


Application viscosity @ 30oc

25-35 sec

By b-4 ford cup

Shade

According to the requirement of the party

Visually

Volume solid %

32 %


Theoretical spreading

9 – 10

M2/ltr @ 30 - 35 microns dry film thickness

Flash Point

Above 25oC

Abel closed cup

Drying time @ 30oC
Tack Free
Hard dry
15 – 20 minutes
2-3 hrs


Shelf life

6 months

Months at 30oC

APPLICATION DETAILS:

APPLICATION METHOD                    :         Air Spray / Brush

RECOMMENDED THINNER               :         Witcoat Q.D. Thinner  

FILM THICKNESS                             :         Dry: 35-45 microns (By Dft-Meter)

SURFACE PREPARATION:

Remove oil grease with suitable detergent solution and other contaminants by high pressure fresh water hosing. Dust off the residue.

APPLICATION CONDITIONS:

Apply only on a dry and clean surface, with a temperature above the dew point to avoid condensation.

SAFETY: 

As a general rule, inhalation of solvent vapour or paint mist and contact of liquid paint with skin and eyes should be avoided. Forced ventilation should be provided when working with solvent borne coating in confined spaces or stagnant air. Even when ventilation is   provided respiratory skin & eyes protection are always recommended when spraying.  In addition, national local safety regulations should   be followed.

DISCLAIMER: 

The information contained within this data sheet is based on information believed to be reliable at the time of its preparation. The company will not    be liable for loss or damage howsoever caused including liability for negligence, which may be suffered by the user of the data contained herein. It is the user's responsibility to conduct all necessary tests to confirm the suitability of any product or system for their intended use. No guarantee of results is implied since condition of use is beyond our control.


WITMANS INDUSTRIES PVT. LTD

Contact Us

( *represents compulsory fields )

Tips on getting accurate quotes. Please include product name, order quantity, usage, special requests if any in your inquiry.